573.445.3599

home products About Us search contact Business Policy
 

Home » Lid Supports Drop Lid Stays All Kinds

 Checkout
Price
Combination Drop Front Desk Lid Hinge and Stay, Brass Plated Steel Sold by Each D-1758 BM-1570PB

Details 

BM-1570PB.. Brass Plated Desk Lid Support Hinge Stay. Sold by each. Dimensions when open- 7" long x 3/4"w Reversible for right or left hand mounting. For use on a drop front or slant drop front secretary desk lid. Acts as a lid support and hinge. Photo shows support in the open position, closed position and partially closed position. See H-7 for a solid brass version of this stay.
Price: $9.95

Combination Drop Front Desk Lid Hinge and Stay, Nickel Plated Steel Sold by Each

Details 

BM-1570PN.. Nickel Plated Desk Lid Support Hinge Stay. Sold by each. Dimensions when open- 7" long x 3/4"w Reversible for right or left hand mounting. For use on a drop front or slant drop front secretary desk lid. Acts as a lid support and hinge. Photo shows support in the open position, closed position and partially closed position. Should be in stock around Mid August 2016.
Price: $12.95

Trunk Chest Liid Support Scissor Hinge Pair, Brass Plated Steel H-2300P

Details 

H-2300P… Pair of Brass Plated Steel Scissor Hinges for chest, trunks and others. Heavy gauge brass plated steel scissor-action hinge to fit overlay lids on cedar chest, hampers, hassocks, tool chest or radiator covers. Also serves to control drop-down on cabinet fronts. 3-1/4" long x 2" high. Sold by each or buy 10, 20 or more and save!
Price: $18.95

Combination Drop Front Desk Lid Hinge and Stay, Solid Brass  H-7 Angle

Details 

H-7..Pair of Solid Brass Desk Lid Support Hinges. Size is 7 x 3/4 inches in the open position. Hinge is manufactured to open at less than 180 degrees. In this way when a load is applied, the hinge stretches to approach 180 degrees instead of sagging past 180 degrees as other hinges often do in operation or over a period of time with use. Trying to bend these hinges by hand is NOT like a load and they will not straighten out in your hands. If they did, they would not be strong enough for a desk surface load. Material thickness: 1/8" (3 mm) leaves; braces are 2 mm thick. .
Price: $42.95

Combination Drop Front Desk Lid Hinge and Stay Bronze Finish HH7-ABHERSH

Details 

HH7-ABHERSH... Antique Brass Finished Desk Lid Drop Front Secretary Lid Support Hinge, sold by each. Universal right or left. Dimensions when fully open- 7-1/8 inches long x 3/4 inches wide. These hinge supports are not completely flat so they raise the lid up a few degrees. Since many of the sag this few degrees should help, but you need to be aware of it. Photo shows hinge in a completely open position and partially open position. When fully open the 2 screw hole plates would be on the same plain. Acts both as a hinge and a support. Hinge stay includes screws. Sold by the Each.
Price: $11.95

Folding Pair of Solid Brass Drop Front Desk Lid Supports  LS-18HERSH

Details 

LS-18HERSH... Pair of Solid Brass Drop Front Desk Lid Supports. Satin Brass for Secretary Desk or other drop downs. One of the longest lid supports we sell. This reproduction will hold the lid when extended 180 degrees while the lid is open. Attaches with 3 screws per side, screws included. Approximately 18 inches long when extended. Offers more support because of the length. Flat stock brass is 1/2 inches wide by 1/8 inches thick. Bar that attaches with one screw to cabinet wall is slightly offset to avoid scraping the side. See the extra large picture to see more detail. Excellent piece of hardware. Buy 6 or more and Save. Check details for larger Images!!
Price: $72.95

Folding Drop Lid Desk Support Stay, 10-1/2 Inch Pair in Antique Brass Plate  LS-5ABHERSH

Details 

LS-5ABHERSH... Pair of Antique Brass Drop Front Desk Lid Supports. Brass Plated Lid Stays for Drop Front Secretary. Almost a bronze in color. 10-1/2 inches long end to end. 10 inches long when open from center of screw hole to bottom of foot. Bar is approximately 9/16 inches wide. Screw holes in foot are approximately 7/8 inches on center. Does not include attachment screws. Locks in place when fully opened.
Price: $22.95

Folding Drop Lid Desk Support Stay, 10-1/2 Inch Pair in Brass Plate D-2742 LS-5PBHERSH

Details 

LS-5PBHERSH...Pair of Brass Plated Drop Front Desk Lid Supports for Drop Front Secretary. 10-1/2 inches long end to end. 10 inches long when open from center of screw hole to bottom of foot. Bar is approximately 9/16 inches wide. Screw holes in foot are approximately 7/8 inches on center. Does not include attachment screws. Locks in place when fully opened. Check details for larger images!!
Price: $22.95

Round Keyboard Tray Latch for Drop Front Tray Left Hand Side Mount Stickley  M-170SLIDELHD

Details 

M-170SLIDELHD... Round Left Hand Keyboard Tray Latch. Side Mounted Rooster Catch for Drop Front Desk and Keyboard Trays. This is the Left Hand version. All steel, spring loaded, positive engagement side mounted catch in Statuary Bronze finish. Mounting holes 7/8 inches apart. Strike supplied is 7/8 inch diameter with screw holes 9/16 inch on center. Rooster part of catch is approx 2-3/8 inches long overall. These latches are use on many drop front desk lids and drop front keyboard lids. Stickley Bungalow uses a catch similar to this one. This is a left hand catch. Right hand catch may be purchased separate, item number M-170SLIDERHD. Details in the extra large photo shows the catch engaged in the upper left of the photo. Quantity discount available at 10, 50, 100 and 500. Check out our selection of desk hinges. Sold by the Each.
Price: $4.45

Round Keyboard Tray Latch for Drop Front Tray Right Hand Side Mount Stickley M-170SLIDERHD

Details 

M-170SLIDERHD....Round Keyboard Right Hand Tray Latch. Side Mount Rooster Catch for Drop Front Desk and Keyboard Trays, Right Hand. All steel, spring loaded, positive engagement side mounted catch in Statuary Bronze finish. Mounting holes 7/8 inches apart. Strike supplied is 7/8 inch diameter with screw holes 9/16 inch on center. Rooster part of catch is approx 2-3/8 inches long overall. These latches are use on many drop front desk lids and drop front keyboard lids. Stickley Bungalow uses a catch similar to this one. This is a right hand catch. Leftt hand catch may be purchased separate, item number M-170SLIDELHD. Details in the extra large photo shows the catch engaged in the upper left of the photo. Sold by the Each. Quantity discount available at 10, 50, 100 and 500. Check out our selection of desk hinges.
Price: $4.45

Trunk Chest Lid Support Stay, Brass Plated Steel OBD-48XBP

Details 

OBD-48XBP... Brass Plated Steel Trunk Chest Lid Stay. 6-3/4 inches long, 6-3/8" holes center to center when fully extended. Leg is 7/16 inches wide. Stays are sold by the each not pairs. Universal left or right. Stay is pictured in open and partially closed position in the photos. Buy 100 or more and save. Sold by each.
Price: $6.25

Trunk Chest Lid Support Stay OBL-2009NP OBD-48XNP

Details 

OBD-48XNP.. Trunk Lid Support Stay Sold by the Each. Nickel Plated Trunk Chest Lid Stay 6-1/4" center to center, side mount.
Price: $6.65

Trunk Chest Lid Support Stay, Steel Brass Plated D-4836 OBG-36BP

Details 

OBG-36BP.. Brass Plated Steel Chest Trunk Lid Stay. Open 8 inches long x 1 inch wide. Used to hold the trunk lid open and to keep the lid from falling backing which can damage the lid and hinges. Holes 7-1/8 inches on center when open. D-4836 Buy 20, 50, 100 and Save! Sold by each.
Price: $5.35

Trunk Chest Lid Support Stay, Steel Brass Plated  D-4828 OBL-1150BP

Details 

OBL-1150BP.. Brass Plated Steel Trunk Chest Lid Stay Open 6 3/4"L x 1"W Holes 6" on center when fully extended. D-4828 Buy 20, 50, 100 and Save! Sold by each.
Price: $5.35

Trunk Chest Lid Support Stay QS-2012R

Details 

QS-2012R...Easy Lift Trunk Chest Lid Stay. Easy up and softly down lid stay. Unique spring plunger technology give efficiency of force. Powerful but small and esthetically pleasing. Mounts to the rear of the chest with most chest requiring only one stay depending on the lid depth. 2nd stay never hurt as a back-up. Will hold lids at an infinite number of intermediate locations between 25-90 degrees. Easy to instal and use. QS-2012R Rear Mounting Single Helix is 5-3/4 inches long x 3/4 inch diameter. For lids 19 x 26 inches long weighing under 9 pounds. Black color with chrome fittings. Sold by each. Click "enlarge" on next page for install instructions and weight calculations.
Price: $6.85

Trunk Chest Lid Support Stay, Nickel Plated RH-1240

Details 

RH-1240.. Nickel Plated Trunk Chest Lid Stay. Open 6.94"L x .50"W. Two Mounting Holes .17 Diameter 16 Guage steel With Bright Nickel Finish. Can be used as both Left or Right Hand stay. Buy 100 or more for a Discount. Sold by the Each.
Price: $6.25

Curved Drop Front Desk Lid Stay, Pair in Brass Plate RS-257P

Details 

RS-257P... Pair of Brass Plated Curved Drop Front Secretary Desk Lid Stays. Brass plated steel. 4-3/16" long when measured from round end to round end. Approximately 4-7/16" from round end to foot. Screws included. Buy 20, 50, 100 or more and save!
Price: $8.45

Trunk Chest Lid Support Stay Braking Type S-0106256S

Details 

S-0106256S.. Adjustable Braking Action Trunk Chest Lid Support Design for large lids on footlockers and the like. Chromed Steel rod and bar with nylon slide, turn knob control. Simple mechanism which can be handed left and or right. Nice stay for the money. Stay is 10-1/2 inches long from the end to the foot. See next page for full length view. Sold by the each, not pairs. Photos are are for views of both sides. Can be used as a single stay but lid flexing could occur on larger, longer lids. Some customers like the stability and strength of 2 stays.
Price: $9.95

Pair Vanity Mirror Hinge Stays S-14045/75W

Details 

S-14045/75W.. Pair Vanity Mirror Hinge Stays. Cantilevered spring-balanced stay for mirrored Vanity tops. All steel, baked white epoxy. Raises 75º degrees. Easy lid removal and adjustment with keyhole slots. Measurements are in millimeters. There are approximately 26mm in an inch, so hinge is approximately 1 inch wide x 4 inches long.
Price: $16.95

Trunk Chest Lid Support Stay PAIR Locking Lift Up S-157AL

Details 

S-157AL.. Pair of Quiet Action Locking Lift-Up Supports. Patented Spring-operated friction discs prevent slamming when lowered. Up-action is friction free motion to any stop position. Down-movement is slow and controlled after release. 5-5/8" long from top to bottom. Used on Bars, Pianos, and Display Cabinets. Steel with a bronzed finish. See details
Price: $10.95

Folding Pair of 10 Inch Solid Brass Drop Front Desk Lid Stays S-1749-10P

Details 

S-1749-10P... Pair of Solid Brass Drop Front Desk Lid Stays. 10 inch size. Locking lid stay for drop down lids for secretary cabinets and the like. High Quality Lid Stay. This stay comes in several sizes including 6, 8, 10, 12 & 16" sizes. Be sure to check out the brass push button secretary latches in two sizes.S-174910P. See item MP-3 or M-3175P Formerly numbered M-0907P
Price: $114.95

Foldinf Pair of 12 Inch Solid Brass Drop Front Desk Lid Stays S-1749-12P

Details 

S-1749-12P...Pair of Solid Brass Drop Front Desk Lid Stays. 12 inch size. Locking Secretary lid stay for drop down lids for secretary cabinets and the like. High Quality Lid Stay. This stay comes in several sizes including 6, 8, 10, 12 & 16" sizes. Be sure to check out the brass push button secretary latches in two sizes.S-174912P. See item MP-3 or M-3175P Formerly numbered M-0907P
Price: $128.95

Foldinf Pair of 16 Inch Solid Brass Drop Front Desk Lid Stays S-1749-16P

Details 

S-1749-16P...Pair of Solid Brass Drop Front Desk Lid Stays. Secretary Drop Lid Stay is 16 inches long. Locking lid stay for drop down lids for secretary cabinets and the like. High Quality Lid Stay. This stay comes in several sizes including 6, 8, 10, 12 & 16" sizes. Be sure to check out the brass push button secretary latches in two sizes. See item MP-3 or M-3175P Formerly numbered M-0907P 124.95 per pair
Price: $155.95

Foldinf Pair 8 Inch Solid Brass Drop Front Desk Lid Stays S-1749-8P

Details 

S-1749-8P Pair of Solid Brass Drop Front Desk Lid Stays. Secretary Lid Stay is 8 inches long. Locking lid stay for drop down lids for secretary cabinets and the like. High Quality Lid Stay. This stay comes in several sizes including 6, 8, 10, 12 & 16" sizes. Be sure to check out the brass push button secretary latches in two sizes. S-1749-8P. See item MP-3 or M-3175P Formerly numbered M-0907P
Price: $98.95

Folding Drop Lid Desk Support Stay, 7 Inch Pair in Bronze Plate S-177L

Details 

S-177L... Pair of Bronzed Finished Drop Front Desk Lid Stays, steel. 7" long overall when complete open. Buy 10, 20 or more and save. Check details for larger images!
Price: $18.95

Slotted 7 Inch Bronze Plated Steel Spring Tension Lid Stay

Details 

S-186-7L... 7 Inch Bronze Plated Steel Spring Tension Drop Front Desk Lid Stay. Slotted Sliding Spring Tension Secretary Lid Stay 7" Long Steel, Universal left or right. Sold by each.
Price: $9.95

Tensioned Brass Plated Steel Drop Front Desk Slotted Sliding Stay S-186-7P

Details 

S-186-7P...Brass Plated Steel Tensioned Drop Front Desk Stay. Sold by each not pairs. Tensioned Slotted Sliding Secretary Desk Lid Stay requires no flywheel tightening. 7 inches long. Universal left or right. Check details for larger Photo
Price: $9.95

Slotted 10 Inch Nickel Plated Steel Drop Front Desk Lid Stay S-186/10N

Details 

S-186/10N.. Nickel Plated Secretary Desk Drop Front Lid Stay. Stay has spring locked fiber washers providing friction control on slide. 10" Long reversible, universal left or right. Sold by each not pairs
Price: $10.95

Slotted 10 Inch Brass Plated Steel Drop Front Desk Lid Stay S-186/10P

Details 

S-186/10P..Brass Plated Steel Drop Front Desk Lid Stay. Sliding Secretary Desk Lid Stay is 10" long. Universal left or right. Spring Loaded behind fiber washer creates friction. Sold by each, not pairs.
Price: $10.95

Slotted 10 Inch Bronze Copper Plated Drop Front Desk Lid Stay S-187-10D with Copper Side

Details 

S-187-10DC… Bronze Copper Finished Drop Front Desk Lid Stay. Adjustable Tension Slotted Sliding Secretary Desk Lid Stay with Fingertip fly wheel tightening. Stay is 10 inches long by 11/16 wide. Universal Right or Left. Two views are shown as one side is antique bronze in color and the other side has a a more copper finish. A nicer look. Sold by the each not pairs. See larger view.
Price: $12.95

Slotted 10 Inch Brass Plated Steel Drop Front Desk Lid Stay

Details 

S-187-10P… Brass Plated Steel Drop Front Desk Lid Stay. Adjustable Tension Slotted Sliding Secretary Desk Lid Stay with Fingertip fly wheel tightening. Stay is 10-1/4 inches long. Slotted bar is 11/16 inches wide. Foot is 1-1/4 inches by 1/2 inches. Universal Right or Left. Sold by the each not pairs.
Price: $12.95

Slotted 7 Inch Antique Brass Drop Front Desk Lid Stay S-187-7D

Details 

S-187-7D... Antique Brass Plated Drop Front Desk Lid Stay. Adjustable Tension Slotted Sliding Secretary Lid Stay with Finger-tip flywheel tightening. Stay is 7-1/8 inches long from end to the foot Foot is 1-1/4 x 1/2 inches. Slotted bar is 3/4 inches wide. Steel, Universal left or right. Sold by each.
Price: $9.95

Z DISCONTINUED, WILL NOT SHIP. Cocktail Cabinet Lid Stay,  Bronze Plated Steel PAIR Bronze Plated  S-207L&R

Details 

S-207L&R... DISCONTINUED, WILL NOT SHIP. Pair of Bronze Finished Steel Articulated Cocktail Cabinet Lid Stays. Interactive top and front stay. As the front is opened, the top lifts automatically! Holds firmly at 90 degree opening with front shelf for serving and easy access to glasses or bottles in rear. Sold in pairs, Lefts and Rights. This is old new stock, circa 1960 which is in very limited supply.
Price: $0.00

End Stop 10" Nickel Plated Cabinet Door and Drop Lid Support Stay / Lift S-214N10K

Details 

S-214N10K.. 10" Nickel Plated Cabinet Door and Drop Lid Support Stay. Free Sliding Slide. (patented). For lift lids on chest, piano benches, cabinet doors etc. Universal Left or Right. Round Steel bar with a nylon slider. Sold by each
Price: $9.95

End Stop 8" Bronze Finished Cabinet Door and Drop Lid Support Stay S-214N8L

Details 

S-214N8L.. 8" Bronze Finished Cabinet Door and Drop Lid Support Stay, Free Closing. For lift lids on chest, piano benches, cabinet doors etc. Universal Left or Right. Round Steel bar with a nylon slider.
Price: $9.45

End Stop 8" Nickel Plated Cabinet Door and Drop Lid Support Stay S-214N8N

Details 

S-214N8N.. 8" Nickel Plated Cabinet Door and Drop Lid Support Stay, Free Closing. For lift lids on chest, piano benches cabinet doors etc. Universal Left or Right. Round Steel bar with a nylon slider. Sold by each.
Price: $9.45

End Stop 10" Nickel Plated Cabinet Door and Drop Lid Support Friction Stay S-214NF10K

Details 

S-214NF10K.. 10" Nickel Plated Cabinet Door and Drop Lid Support Friction Stay. Friction Control Slide. (patented). For lift lids on chest, piano benches, cabinet doors etc. Universal Left or Right. Round Steel bar with a nylon slider.
Price: $9.95

Curved Drop Front Desk Lid Stay, Pair in Bronze Finish S-259LRHD L&R

Details 

S-259LRHD... Pair of Bronze Finished Curved Drop Front Desk Lid Stays. Adjustable Tension Sliding Quadrant Stay with Finger-tip flywheel control. Steel, 6-1/4" long. Nice Curved Lid Stay. Check details for Larger Photo!!
Price: $18.95

Curved Drop Front Desk Lid Stay, Pair in Brass Plate S-259LRHP L&R

Details 

S-259LRHP... Pair of Brass Plated Curved Drop Front Desk Lid Stays. Left and Right Hand Adjustable Tension Sliding Quadrant Secretary Lid Stays with Finger-tip flywheel control. Steel, 6-1/4" long. Nice Curved Lid Stay.
Price: $18.95

Curved Drop Front Desk Lid Stay, Pair in Bronze Finish  S-2875L

Details 

Pair of Bronze Finished Silent Quadrant Sliding Drop Front Secretary Desk Lid Stay. No metal to metal contact. Pivoting friction slider, fiber lined for smooth function. 5" steel size. Nice Curved Lid Stay.
Price: $16.85

Slotted Brass Plated Sliding U-Channel Drop Front Secretary Desk Lid Stay S-289N812P

Details 

S-289N812P...Brass Plated Sliding U-Channel Drop Front Secretary Desk Lid Stay. A Strong U-Shaped Steel Stay with Nylon Slider. Brass Plated, Universal Left or Right. 8-1/2" channel 9" Arm. 16-1/4" Long fully extended. Slotted side is mounted vertically inside the cabinet wall, with footed arm mounted to lid at a 45 degree angle. Lid stops when footed bar reaches the bottom of the slotted bar. Sold by each. Check details for larger Photo!!!
Price: $12.65

Pair of Trunk Chest Friction Control Lid Stay S-44W/LR

Details 

S-44W/LR..Pair of Trunk Chest Friction Control Lid Stay. Opens to 90 degrees with positive friction lock in up position. Adjustment screw to regulate rate of decent. Smooth No Slam Action. Vertical height requires approximately 7" Polished chrome arm with white nylon housing. A premium quality Secretary Lid stay sold in pairs. Stay is approximately 6-3/4" long from foot to "L" bend. All of the mounting dimensions show here are for hinging with butt hinges or piano hinges. H-32435 six way adjusting flap hinge may also be use with some slight change in the mounting locations. Check details for larger images.
Price: $37.50

Trunk Chest Lid Support Stay Steel S-4830

Details 

S-4830.. Steel Trunk Lid Stay can be used as both a Left or Right Hand stay. Used to hold trunk lid up and to keep lid from opening too far and breaking the hinges. Open position is 7-1/16"L x 7/8"W Sold by each.
Price: $5.95

Trunk Chest Lid Support Stay Steel S-4840

Details 

S-4840..Steel Trunk Lid Stay can be used as both a Left or Right Hand stay. Used to hold trunk lid up and to keep lid from opening too far and breaking the hinges. Open position is 8 1/2"L x 1 3/16"W. Sold by each.
Price: $6.95

Trunk Chest Lid Support Stay Steel S-4850

Details 

S-4850.. Steel Trunk Lid Stay can be used as both a Left or Right Hand stay. Used to hold trunk lid up and to keep lid from opening too far and breaking the hinges. Open position is 10 7/8"L x 1 3/16"W Sold by each.
Price: $6.95

Trunk Chest Lid Support Stay, Self Balanced S-57554L

Details 

S-57554L.. Self -Balanced Lift Up Support Anti-Slam Lift UP lid support for trunks and chest, of different types. All Steel, bronzed. Easy installation with only 4 screws. Approximately 5-5/8 inches long end to end. Screws not included. Lighter lids need only one centered stay. Use pairs for heavier lids. See enlarge view for more detail. Used a lot on toy chest but we suggest using 2 stays in the event of failure. As with all toy boxes adult supervision is required and if the lid is oversized and heavy then use as a toy box may not be appropriate. Sold by each.
Price: $7.65

Drafting Table or Lid Support Adjustable Solid Polished Brass

Details 

S90917P Solid Brass Adjustable Drafting Table Lid Support. Screw Down Knob tightens at any point along the 10 inch arm. Base is 2-1/4 inches long x 3/4 inches wide. Lots of applications for this type of support. Sold by each.
Price: $24.95

Heavy Duty Random Stop Buffering Lid Support Stay

Details 

SC01B Heavy Duty Random Stop Buffering Lid Support Stay. Heavy weight, high bearing capacity lid support with buffering. Easy installation, easy speed and weight adjustment. Ideal for overhead cabinet doors 28 to 36 inches wide and 16 inches deep. Overall length of stay is 15-3/4 inches x 2-3/4 inches wide. Maximum weight capacity is 12 pounds. Screw holes are 32 millimeters on center. Arm is 8-3/4 inches long. Handed left or right. Gray and White ABS with Silver Anodized shaft. first 45 degree free stop and last 45 degrees is soft at closing. Sold by each.
Price: $28.95

Folding Convertible Reverible Adjustable SDELTA Lid Stay

Details 

SDELTA..The amazing lid stay that's, convertible! reversible! adjustable! demountable! Can be used on overhead and drop down lids up to 20 pounds. 8 inches long overall. All holes 32mm centers and can be mounted 27mm or 32mm from the leading edge for users of the 32 mm combination drilling system. Application has been made simple since brackets are fastened to the cabinet separately then snap onto the fitting! Angle of opening varies 75-90 degrees by relocation of brackets and varies according to the type hinge used. Adjust from sliding, braking action to hold at intermediate positions. Reverse tension direction from Lift-up to Drop Down function. Fastens interchangeably Left or Right. Can work as a secretary lid stay in some cases. Strong Die Cast Nickel Plated Zamak. Check details for Larger image.
Price: $22.95

Gas Spring Pneumatic Lid Stay SGS-800-10

Details 

SGS-800-10..Gas Spring Pneumatic Lid Stay. 22 lbs closing Strength. For lift up lids and for drop down lids. Assist some in opening of lid but needs pressure applied to close. Use two and double the closing strength. Similar in operation to those used on hatchback cars. When installed you must push/pull down the lid to close. Resistance of stay lessens as it gets closer to closing. Lid stay in photo is in the open position and is almost impossible to close until installed and all SGS800 lid stays are the same size, just the strengths are different. We recommend using two stays on lids longer than 36 inches. As a general rule when using two stays then you would cut the weight factor in half, for instance a 44b lid could be supported by two 22 pound rated stays. Length and width is a variable which may affect choosing a stronger or weaker stay. Good quality stay. Buy 10, 50, 100, 200 or more and save! See enlarge for illustration of different installations.
Price: $24.95

Gas Spring Pneumatic Lid Stay SGS-800-12

Details 

SGS-800-12..Gas Spring Pneumatic Lid Stay. 26 lbs closing Strength. For lift up lids and for drop down lids. Assist some in opening of lid but needs pressure applied to close. Use two and double the closing strength. Similar in operation to those used on hatchback cars. When installed you must push/pull down the lid to close. Resistance of stay lessens as it gets closer to closing. Lid stay in photo is in the open position and is almost impossible to close until installed and all SGS800 lid stays are the same size, just the strengths are different. We recommend using two stays on lids longer than 36 inches. As a general rule when using two stays then you would cut the weight factor in half, for instance a 44b lid could be supported by two 22 pound rated stays. Length and width is a variable which may affect choosing a stronger or weaker stay. Good quality stay. Buy 10, 50, 100, 200 or more and save! See enlarge for illustration of different installations.
Price: $24.95

Gas Spring Pneumatic Lid Stay SGS-800-15

Details 

SGS-800-15..Gas Spring Pneumatic Lid Stay. 33 lbs closing Strength. For lift up lids and for drop down lids. Assist some in opening of lid but needs pressure applied to close. Use two and double the closing strength. Similar in operation to those used on hatchback cars. When installed you must push/pull down the lid to close. Resistance of stay lessens as it gets closer to closing. Lid stay in photo is in the open position and is almost impossible to close until installed and all SGS800 lid stays are the same size, just the strengths are different. We recommend using two stays on lids longer than 36 inches. As a general rule when using two stays then you would cut the weight factor in half, for instance a 44b lid could be supported by two 22 pound rated stays. Length and width is a variable which may affect choosing a stronger or weaker stay. Good quality stay. Buy 10, 50, 100, 200 or more and save! See enlarge for illustration of different installations.
Price: $24.95

Gas Spring Pneumatic Lid Stay SGS-800-6

Details 

SGS-800-6..Gas Spring Pneumatic Lid Stay. 13 lbs closing Strength. For lift up lids and for drop down lids. Assist some in opening of lid but needs pressure applied to close. Use two and double the closing strength. Similar in operation to those used on hatchback cars. When installed you must push/pull down the lid to close. Resistance of stay lessens as it gets closer to closing. Lid stay in photo is in the open position and is almost impossible to close until installed and all SGS800 lid stays are the same size, just the strengths are different. We recommend using two stays on lids longer than 36 inches. As a general rule when using two stays then you would cut the weight factor in half, for instance a 44b lid could be supported by two 22 pound rated stays. Length and width is a variable which may affect choosing a stronger or weaker stay. Good quality stay. Buy 10, 50, 100, 200 or more and save! See enlarge for illustration of different installations.
Price: $24.95

Gas Spring Pneumatic Lid Stay SGS-800-8

Details 

SGS-800-8..Gas Spring Pneumatic Lid Stay. 17 lbs closing Strength. For lift up lids and for drop down lids. Assist some in opening of lid but needs pressure applied to close. Use two and double the closing strength. Similar in operation to those used on hatchback cars. When installed you must push/pull down the lid to close. Resistance of stay lessens as it gets closer to closing. Lid stay in photo is in the open position and is almost impossible to close until installed and all SGS800 lid stays are the same size, just the strengths are different.We recommend using two stays on lids longer than 36 inches. As a general rule when using two stays then you would cut the weight factor in half, for instance a 44b lid could be supported by two 22 pound rated stays. Length and width is a variable which may affect choosing a stronger or weaker stay. Good quality stay. Buy 10, 50, 100, 200 or more and save! See enlarge for illustration of different installations.
Price: $24.95

Pair of Drop Down Lid Stays L&R SI-8425LRA3B

Details 

SI-8425LA3B.. Pair of Drop Down Lid Stays, left and right hand. Lid stay is 8-7/16 inches long from the foot to the other end. Flat bar is 5/16 wide. Foot is 1-3/4 x 5/8 inches. Foot screw holes are 1-1/4 inches on center to the 2 outside holes. Triangle plate is 1-3/4 inches long and screw holes are 1-1/4 inches on center.Flap Stay with Braking Action Unique braking action. Infinitely adjustable using miniature nylon cylinders to correct for all flap weights. Cannot jam or slam. Not affected by temperature changes. Functions on 32mm system. For vertical or horizontal application. Chromed steel bar and nylon parts in Brown. Secretary Lid Stay and other lid applications. Braking tension is increased by loosening the set screw. Check Details for Larger Photo.
Price: $18.95

Pair of Drop Down Lid Stays L&R SI-8430LRA3B

Details 

SI-8430LRA3B... Pair of Drop Down Lid Stays, Left & Right Hand Flap Stay with Braking Action Unique braking action. Infinitely adjustable using miniature nylon cylinders to correct for all flap weights. Cannot jam or slam. Not affected by temperature changes. Functions on 32mm system. From tip to bottom of foot measures 9-3/4" long. Flat bar is 5/16 wide. Foot is 1-3/4 x 5/8 inches. Foot screw holes are 1-1/4 inches on center to the two outside screws. Triangle plate is 1-3/4 inches long and screw holes are 1-1/4 inches on center. For vertical or horizontal. application. Chromed steel bar and nylon parts in Brown. Secretary Lids and other lids Check Details for Larger Photo.
Price: $19.95

Pair of Drop Down Lid Stays L&R SI-8435LRA3S

Details 

SI-8435LRA3S... Pair of Drop Down Lid Stays. Left & Right Hand Flap Stay with Braking Action Unique braking action. Infinitely adjustable using miniature nylon cylinders to correct for all flap weights. Cannot jam or slam. Not affected by temperature changes. Functions on 32mm system. From tip to bottom of foot measures 10-3/4" long. Flat bar is 5/16 wide. Foot is 1-3/4 x 5/8 inches. Foot screw holes are 1-1/4 inches on center to the two outside screws. Triangle plate is 1-3/4 inches long and screw holes are 1-1/4 inches on center. For vertical or horizontal application. Chromed steel bar and nylon parts in Black. Secretary Lid Stays and other lids. Check Details for Larger photo.
Price: $20.95

Pair of Drop Down Lid Stays L&R SI-8440LRA3S

Details 

SI-8440LRA3S... Pair of Drop Down Lid Stays. Left & Right Hand Flap Stay with Braking Action Unique braking action. Infinitely adjustable using miniature nylon cylinders to correct for all flap weights. Cannot jam or slam. Not affected by temperature changes. Functions on 32mm system. From tip to bottom of foot measures 12-1/8" long. Flat bar is 5/16 wide. Foot is 1-3/4 x 5/8 inches. Foot screw holes are 1-1/4 inches on center to the two outside holes. Triangle plate is 1-3/4 inches long and screw holes are 1-1/4 inches on center. For vertical or horizontal application. Chromed steel bar and nylon parts in Black. Secretary Lid Stays and other lids. Tightening the set screw makes the stay slide easier. Check Details for larger Photo.
Price: $22.95

Pair of Overhead Lid Stays SKLS-250LRW

Details 

SKLS-250LRW...Pair of Overhead Lid Stays For wall units, tall cases or any overhead storage.Mounts on inside of cabinets and opens between 70-90 degrees depending on positioning. Lift up and it locks automatically. Polished chrome arm with white nylon housing. Sold in pairs right and left. View the extra large view for a clearer drawing of an install. Measurements are in millimeters. Stay is 10-1/8 inches long from end to bottom of the foot.
Price: $16.95

Pair of Automatic Drop Front Desk Flap Supports SQ-8320WAW

Details 

SQ-8320WAW.. Pair of Automatic Drop Front Desk Flap Supports Automatic braking action, Automatic locking Automatic shock absorber softens down drop. Chromed Steel with white nylon. For flaps 8"-10" high. Paired left and right. Stay length is 8 inches from tip to bottom of the foot
Price: $13.75

Pair of Automatic Drop Front Desk Flap Supports  SQ-8325WAW

Details 

SQ-8325WAW.. Pair of Automatic Drop Front Desk Flap Supports Automatic braking action, Automatic locking Automatic shock absorber softens down drop. Chromed Steel with white nylon. For flaps 10"-13" high. Paired left and right. Stay length is 10 inches from tip to bottom of the foot
Price: $16.95

Pair of Drop Front Desk Lid Stays L&R Hand SX-8519-metLRH

Details 

SX-8519-metLRH.. Pair of Drop Front Desk Lid Stays L&R Hand. Metal Adjustable Braking Action Lid Support. Delivered pre-set to brake a 10lb. lid. Chromed Steel rod and bar with nylon slide control. Mounting height center to center 7-9/16". Flap height 11"-14". Round Bar is mounted vertically inside secretary desk and flat bar is at a 45 degree angle while the lid is open. Lid stops when flat bar slides to bottom of the vertical round bar. These type stays were made in many custom varieties so we won't have every size that was made.
Price: $25.95

Pair of Drop Front Desk Lid Stays L&R Hand SX-8525-metLRH

Details 

SX-8525-metLRH.. Pair of Drop Front Desk Secretary Lid Stays L&R Metal Adjustable Braking Action Lid Support Chromed Steel rod and bar with nylon slide control. Mounting height center to center 10-1/16". Flap height 14"-16". Case Depth horizontal 11"-14". Left hand Lid support. Round Bar is mounted vertically inside secretary desk and flat bar is at a 45 degree angle while the lid is open. Lid stops when flat bar slides to bottom of the vertical round bar. These type stays were made in many custom varieties so we won't have every size that was made.
Price: $27.95

Pair of Drop Front Desk Lid Stays L&R Hand SX-8528-metLRH

Details 

SX-8528-METLRH.. Pair of Drop Front Desk Lid Stays L&R Hand. Metal Adjustable Braking Action Stay. Chromed Steel rod and bar with nylon slide control. Measures: "A" is 7-3/8" from the box to the bottom of the foot. "B" is 8-1/2" from the box to the the bracket."C" is 10-1/8" from inside of bracket to inside of bracket. Overall length is 12" Round Bar is mounted vertically inside secretary desk and flat bar is at a 45 degree angle while the lid is open. Lid stops when flat bar slides to bottom of the vertical round bar. These type stays were made in many custom varieties so we won't have every size that was made. Check details for Images of A, B, C, for reference.
Price: $28.95

Pair of Drop Front Desk Lid Stays L&R Hand Square Ends SX-8538AWLRHA

Details 

SX-8538AWLRHA… Pair of Drop Front Secretary Desk Lid Stays with "A" nylon ends R&L hand. Round slide bar with ends is approximately 16" long. Flat bar is approximately 10-7/8 inches long measuring from bottom of foot to the bottom of the sliding nylon braking box. Braking box slows the downward motion with adjustable tension. Larger pictures show the flat bar at about a 45 degree angle and the round bar in a vertical position. This picture would represent the position it would be in if installed in the secretary with drop lid down. Round vertical bar is installed inside the secretary with the flat bar at 45 degrees which will be attached to the lid. In this position the inside of the secretary would need to be approximately 24 inches tall which would make the lid about the same 24 inches in depth.Check details for larger Images..
Price: $30.95

Pair of Wooden Drop Leaf Table Supports, Slide Out Type X-291934

Details 

X291934…Pair of Wooden Pull Out Table Drop Leaf Support, enough for one leaf. Small part is attached to underside of the table. Long part slides outs to support table leaf. Small Brass Cup Pull on the side assist user in pulling out slide. Photo shows 3 views, long side with brass cup pull, small side which attaches to table and top view of the slide. Long side of the slide is 19-3/4 inches long. Sort side of slide is 5 inches long. Each side is 1-3/4 inches high and 7/8 inches thick which means the two sides together are 1-3/4 inches thick. When installed the slide come approximately 12 inches to support the leaf. This pair of slide out supports replaces W-5137.
Price: $48.95

Pair of Lift Up Drafting Table Ratchet Support Stays X7020005Z

Details 

X-70200/05Z.. Pair of Lift Up Drafting Table Ratchet Support Stays. Wherever a tilt is needed...beds sofas, drafting tables! Lift to the desired angle and it locks into place. Lift again to release and it folds down. Rugged, heavy steel, anti rust finishing. 10 position locking. Maximum operating arc 112º. 8-1/2" long with 7-7/8" rotating arm Buy 5, 10 50 pairs or more and save.
Price: $21.95

 
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams


See Stainless Steel Trash Grommets


· Tea Cart Wheels

· Stainless Steel Trash Grommets

· Wire Grommets Plastic

· Vent Grommets

· Lazy Susan Swivel

· Ikea Drawer Slide Replacements

· Butler Tray Hinges & Flip Top Hinges

· Hoosier Cabinet Hardware

· HomArt

· Antique Trunk Hardware

· Magnifying Glasses


Shopping Cart Software by EcommerceTemplates.com